ASTM steel pipe,ASTM elbow,ASTM fitting_HeBei Zhongyue Pipe Fittings Sales Co.,Ltd

13
Aug
2018
20# seamless steel
20# seamless steel
 
1.1 the nominal diameter of the steel pipe is 88.9mm, and the nominal wall thickness is 6.45mm. 1.2 the allowable deviation of the outer diameter and wall thickness of the steel pipe should comply with the requirements of Table 1. Allowable...
11
Aug
2018
Q195 steel plate
Q195 steel plate
 
main characteristics: It has high plasticity, toughness and weldability, good pressure performance, but low strength. application examples: Used for making anchor bolts, ploughs, chimneys, roof panels, rivets, low carbon steel wire, sheet m...
10
Aug
2018
No. 45 steel
No. 45 steel
 
processing method: Folding heat treatment Recommended heat treatment temperatures: normalizing 850, quenching 840, tempering 600. No. 45 steel is a high quality carbon structural steel with low hardness and easy cutting. It is often used in...
09
Aug
2018
Stainless steel NO1 plate and 2b plate
Stainless steel NO1 plate and 2b plate
 
2B cold rolled stainless steel means cold rolled steel plates are produced by cold rolling. Cold rolling is a steel plate that further rolled No.1 hot-rolled steel plate to a target thickness at room temperature. Compared with the hot rolle...
08
Aug
2018
Low alloy steel
Low alloy steel
 
Introduction of varieties Welding high strength steel welding high strength steel, also known as weldable low alloy high strength structural steel, is the main body of low alloy high strength steel. It has three basic properties: first, low...